Home / Hunt County / Greenville
Property-specific planning for Greenville-area wells
Water Well Drilling in Greenville, TX
Around Greenville, a street address alone does not settle the well question. Begin with the exact tract, then compare recent domestic records, aquifer and jurisdiction context, utility and septic constraints, and whether a drilling rig can actually reach the proposed location.
- Address-level intake
- Hunt County context
- Clear next steps
Greenville planning snapshot
A 171-foot median, with a 138-to-216-foot middle band
Among recent domestic reports submitted with Greenville as the city or address label, half of the recorded depths fall between 138 and 216 feet. That band is useful for orientation, but the closest comparable wells still carry more weight than a citywide midpoint.
Greenville is the submitted city or address label, not a city-limits count. All 31 records in this recent domestic set are coded to Hunt County, but a mailing label still does not prove city limits, the applicable jurisdiction or the producing interval beneath one tract.
What the Greenville records can and cannot tell you
Recent Greenville-labeled reports show why parcel-level review matters
The 31-record set has a 171-foot median, a middle half from 138 to 216 feet and a 10th-to-90th percentile span from 115 to 274 feet. Reported depths range from 64 to 396 feet. That spread is too wide to turn into a parcel estimate, so compare location, completion date, domestic use and construction details before treating any nearby record as a forecast.
TWDB describes the Woodbine and Nacatoch as minor aquifers in northeast Texas, but a mailing city does not identify the producing interval beneath one tract. A representative Greenville city-center coordinate does not fall inside an active groundwater-conservation-district polygon in the current state boundary file. Use the exact property coordinates to confirm aquifer and jurisdiction, then verify current state, county, city or district requirements before work begins.
- Confirm the tract first: check city limits or ETJ status, available utility service, deed or subdivision restrictions, septic setbacks and current jurisdiction for the exact property.
- Build a tight comparison set: favor nearby domestic completions with known dates and depths instead of mixing in monitoring, public-supply or irrigation wells.
- Trace the rig route on the ground: gates, overhead lines, finished landscaping, structures, grades and turning space can change the feasible drill location.
- Budget beyond the borehole: a practical residential planning range is commonly $25,000 to $45,000+ once drilling, casing, pump, pressure equipment, trenching, electrical work, testing and possible treatment are included.
From property question to complete-system quote
Bring the tract and the record pattern into one scope
A depth estimate without a tract review leaves out the expensive details. Use these four steps to move from a Greenville address to a complete-system discussion.
Identify the property
Pin down the street address or parcel, project stage, current water source and any known well history.
Review nearby evidence
Rank recent domestic records by distance, completion date and construction detail, then compare the tract with Hunt County and northeast Texas aquifer context.
Check the rules and route
Confirm the current jurisdiction, state and local requirements, septic and utility constraints, and a workable equipment path before scheduling.
Define the complete scope
Price drilling, casing, pump, pressure or storage equipment, electrical, testing and treatment before comparing totals.
$199 Pre-Drill Intelligence Report
See what the nearest records say before the rig arrives
The property-specific report sorts nearby submitted depths, reported yield where available, aquifer and groundwater-district context, driller activity and site-review questions into one planning report.
Keep exploring local water-well context
Greenville planning starts with Hunt County and nearby records
Use the Hunt County guide as the parent reference, then compare nearby published city and county pages without treating regional patterns as a parcel guarantee.
Nearby published planning guides
These published guides provide useful regional context around Greenville and neighboring North Texas counties.
Greenville water-well questions
Four questions to settle before drilling
How deep are domestic wells labeled Greenville in recent reports?
The 31 domestic reports completed since 2020 with total depth recorded have a 171-foot median. The middle half runs from 138 to 216 feet. Those submitted-record patterns are comparison context, not a depth prediction for one property.
Which groundwater district rules apply near Greenville?
A representative Greenville city-center coordinate does not fall inside an active groundwater-conservation-district polygon in the current state boundary file. That is not a tract determination: use the exact property coordinates and confirm current state, county, city or district requirements before drilling.
What should I budget for a complete residential well?
A practical Texas planning range is commonly $25,000 to $45,000+ after drilling, casing, pump and pressure equipment, trenching, electrical work, testing and possible treatment. Access, depth and site conditions can move the total higher.
What is included in the $199 Pre-Drill Intelligence Report?
The report organizes property-specific nearby depths, reported yield where available, aquifer and groundwater-district context, driller activity and site-review questions before you compare quotes.
Request a drilling quote
Start with the property
Share the exact tract, proposed use, equipment access and timing needed for a useful Greenville-area drilling follow-up. The $199 Pre-Drill Report is ordered separately.
Request a Greenville drilling quote
Share the property, access and project details needed for a useful drilling follow-up.