Home / Erath County / Stephenville
Property-specific planning for Stephenville-area wells
Water Well Drilling in Stephenville, TX
Stephenville sits in a part of Erath County where domestic-well records often run deeper than the city pages farther north. A mailing label still cannot answer the property question by itself. The useful starting point is the tract, recent nearby completions, utility and septic constraints, and whether a drilling rig can reach the proposed location.
- Address-level intake
- Erath County record context
- Clear next steps
Stephenville planning snapshot
A 376-foot median, with a wide 280-to-415-foot middle band
Recent domestic reports carrying a Stephenville city or address label show two important things at once: deeper work is common, and the range is too broad for a citywide depth guess. Half of the recorded completions fall between 280 and 415 feet, while the full set stretches from 60 to 680 feet.
Stephenville is the submitted city or address label, not a city-limits count. Of the 692 recent domestic reports with total depth recorded, 691 are coded to Erath County and one to Comanche County. A mailing label does not prove city limits or the producing interval beneath one tract.
What the Stephenville records can and cannot tell you
The local record set is useful only after it is narrowed
The 692-report set has a 376-foot median, a middle half from 280 to 415 feet and a 10th-to-90th percentile span from 140 to 460 feet. Recorded depths run from 60 to 680 feet. There are 198 reports at 300 feet or less and 93 above 450 feet. Those numbers are a screening tool, not a parcel forecast. The nearest relevant domestic completions, their dates and their construction details deserve more weight than a citywide midpoint.
TWDB identifies the Trinity as a major aquifer across much of central and northeastern Texas. A Stephenville mailing label does not identify the producing interval on one tract. Middle Trinity Groundwater Conservation District serves Erath and Comanche counties and publishes district rules and well-registration material. Confirm the property, current district requirements and state construction rules before work is scheduled.
- Locate the tract precisely: confirm the street address or parcel, city or ETJ status, utility availability, septic layout and any subdivision restrictions.
- Keep the comparison residential: start with recent domestic completions near the property and in the same county instead of mixing them with irrigation, monitoring or public-supply work.
- Check jurisdiction before scheduling: confirm the exact county and district status, TDLR licensing, setbacks and local requirements before scheduling.
- Carry a complete-system budget: serious residential planning starts at $25,000+ because casing, pump, pressure equipment, electrical work, trenching, testing, treatment and access can matter as much as footage.
From property question to complete-system quote
Turn a broad record range into a property plan
Recent Stephenville-labeled domestic records run from 60 to 680 feet. These four steps keep that wide range from becoming a misleading one-number estimate.
Pin down the tract
Confirm the street address or parcel, intended use, utility status, septic plan and any existing well history.
Trim the record set
Compare recent domestic completions by distance, date, depth and construction instead of treating all 692 reports as equally relevant.
Check rules and access
Confirm current Middle Trinity district requirements, TDLR-licensed drilling, setbacks, overhead clearance and a workable rig route.
Price the whole system
Compare scopes that cover drilling, casing, pump, pressure or storage equipment, electrical work, trenching, testing and possible treatment.
$199 Pre-Drill Intelligence Report
See what the nearest records say before the rig arrives
The property-specific report sorts nearby submitted depths, reported yield where available, aquifer and groundwater-district context, driller activity and site-review questions into one planning report.
Keep exploring local water-well context
Stephenville planning starts with Erath County and nearby records
Use the Erath County guide as the parent reference, then compare adjacent county and published city pages without treating a regional pattern as a parcel guarantee.
Nearby published planning guides
These published guides provide regional context around Stephenville and Erath County.
Stephenville water-well questions
Four questions to settle before drilling
How deep are domestic wells labeled Stephenville in recent reports?
The 692 domestic reports completed since 2020 with total depth recorded have a 376-foot median. The middle half runs from 280 to 415 feet. Those submitted-record patterns are comparison context, not a depth prediction for one property.
Which groundwater district serves Stephenville-area properties?
Middle Trinity Groundwater Conservation District serves Erath and Comanche counties. Confirm the exact tract and current registration, spacing and operating requirements before drilling.
What should I budget for a complete residential well?
Use $25,000+ as a serious starting point for a complete residential system, not as a quote. Deeper construction, difficult access, casing, pump and pressure equipment, electrical work, trenching, testing and treatment can move the total higher.
What is included in the $199 Pre-Drill Intelligence Report?
The report organizes property-specific nearby depths, reported yield where available, aquifer and groundwater-district context, driller activity and site-review questions before you compare quotes.
Request a drilling quote
Start with the property
Share the exact tract, proposed use, equipment access and timing needed for a useful Stephenville-area drilling follow-up. The $199 Pre-Drill Report is ordered separately.
Request a Stephenville drilling quote
Share the property, access and project details needed for a useful drilling follow-up.