Home / Texas water well drilling / Hamilton County

Hamilton County, Texas

Water well drilling in Hamilton County

Acreage near Hamilton can present a different drilling plan from property around Hico, Evant, Carlton, or Pottsville. Share the location and what the water needs to support, and TurnKey Wells will help you move toward a useful drilling estimate.

  • Address-based project intake
  • Property-specific planning
  • Clear next steps
1,507Total submitted groundwater and drilling records
1,108Domestic well records
257Stock well records
66Irrigation well records

Have land in Hamilton County? Start with the property address and your water needs.

Hamilton County well depths

What nearby well records tell you

Domestic well records in Hamilton County have a median reported depth of 452 feet. The middle half runs from 378 to 530 feet, while the 10th-to-90th percentile span reaches from 150 to 609 feet. Those figures describe 1,108 domestic records and provide a stronger planning baseline than a countywide average that mixes many well uses.

The exact plan still depends on the property. A site near Hamilton may not match acreage outside Hico, land closer to Evant, or a tract near the Comanche County line. Nearby records, aquifer assignment, access, power, household demand, livestock use, irrigation, storage, and treatment needs all belong in the conversation.

County records can set a realistic starting range. The property location is what turns that range into a useful estimate.

Recorded domestic well depths

The middle half of reported domestic depths

378 feet530 feet
What the county records contain

Hamilton County records reflect homes, ranches, and irrigation

Domestic and stock wells make up most of the submitted county file. Irrigation records add another planning category. Monitoring wells, test wells, and environmental borings should still be separated so their shallow depths do not distort the numbers a rural property owner is likely to use.

1,108

Domestic wells

Household and private-property water records. All 1,108 include a reported depth. The median is 452 feet, the middle half runs from 378 to 530 feet, and the 10th-to-90th percentile span is 150 to 609 feet.

257

Stock wells

Records tied to livestock use. All 257 include a reported depth. The median is 440 feet, the middle half runs from 340 to 520 feet, and the 10th-to-90th percentile span is 150 to 592 feet.

66

Irrigation wells

Wells reported for crop, pasture, or landscape irrigation. All 66 include a reported depth. The median is 460 feet, the middle half runs from 402 to 534 feet, and the 10th-to-90th percentile span is 160 to 600 feet.

47

Test, monitoring, and environmental records

This group includes 15 test wells, 28 monitoring wells, and four environmental soil borings. These records describe subsurface work in the county, but they should not be counted as ordinary household water wells.

29

Other reported uses

This group includes nine rig-supply wells, eight closed-loop geothermal records, four industrial wells, three records marked other, three injection records, and two public-supply wells.

Depth and record history

Different well uses produce different depth patterns

Domestic, stock, and irrigation records center between 440 and 460 feet. Monitoring and environmental work is much shallower and should not be used as a residential depth shortcut.

Record typeMedian depthMiddle halfMedian completion year
Domestic452 ft378-530 ft2014
Stock440 ft340-520 ft2015
Irrigation460 ft402-534 ft2018
Test wells495 ft160-560 ft2006
Monitoring wells20 ft16.5-20 ft2009
Environmental soil borings12 ft12-16 ft2011

The year shown is the median completion year within each record group. It describes the historical file, not the present condition or expected service life of a particular well.

Data source: Texas Water Development Board Submitted Driller's Reports.

What shapes a drilling estimate

The complete job is more than drilling by the foot

A useful estimate should account for where the rig can work, which water-bearing unit is being targeted, how much water the property needs, and the equipment required to deliver it.

01

Property access

County roads, gates, slopes, overhead lines, septic setbacks, and enough room for the drilling rig and support equipment.

02

Water demand

Household use, livestock, irrigation, storage, and peak demand. A home, cattle operation, and irrigation system require different planning.

03

Pump and power

Pump setting, electrical service, controls, pressure tank, trenching, and the distance from the well to the point of use.

04

Complete installation

Casing, testing, pump equipment, storage or treatment when needed, plumbing, startup, and site cleanup.

Start with the property

Get a drilling estimate built around what the land actually needs

Share the Hamilton County property location, intended use, and timing. TurnKey Wells will follow up to understand the project and explain the next step.

Ranch water system planning for Hamilton County Texas acreage
Plan the whole water system

Know what should be included before work begins

A drilling quote is easier to compare when each major piece is listed. The well, pump, controls, pressure system, power, trenching, storage, treatment, testing, and cleanup should not be reduced to one unexplained total.

  • Mobilization and setup
  • Drilling and casing
  • Pump and controls
  • Pressure tank
  • Power and trenching
  • Storage and treatment
  • Water testing
  • Site cleanup

Request a Drilling Quote

Property-specific well research

Pre-Drill Intelligence Report

$199 one-time report

The county numbers on this page show broad patterns. The paid report narrows the research to one property before you compare drilling quotes or decide how to plan the water system.

  • Nearby recorded wells and reported depths
  • Property and groundwater district information
  • Questions to ask before drilling begins
  • A clearer picture of the complete water system

Historical Hamilton County Groundwater Database records are dominated by Trinity Aquifer assignments, especially Hensell and Paluxy. Other and unassigned records also appear. The report organizes nearby records, aquifer context, and current groundwater district information around the property so you can ask better questions before drilling begins.

Simple next steps

From property address to drilling conversation

Tell us about the property

Share the address, how the water will be used, and when you hope to begin.

We review the project

We look at the location and follow up for any details needed to discuss the estimate.

Plan the drilling work

You receive a clear next step for the drilling quote and complete water system.

Hamilton County well questions

Plain answers before you plan the work

Does one groundwater district cover all of Hamilton County?

Do not assume one countywide district boundary applies to every Hamilton County property. District status can change near county lines, especially around Evant. Check the exact property with the Groundwater Conservation District Lookup and confirm current Texas Water Development Board boundaries before drilling.

Why does the exact property location matter for district rules?

Well registration, spacing, permitting, reporting, and production requirements depend on the current district boundary and the tract. Confirm the address, parcel history, and current rules before relying on a general county description.

Is every Hamilton County well in the same aquifer?

No. Historical Groundwater Database records for the county include Trinity, other, and unassigned records. Trinity is the largest family in the file, but the aquifer assignment still needs to be checked near the property.

Are all 1,507 records producing water wells?

No. The total includes monitoring wells, environmental soil borings, test wells, and several specialized uses. This page separates those records so they are not mistaken for household wells.

Can county records predict the depth on one property?

No. County records show patterns, not a guaranteed depth or yield. Nearby records, aquifer conditions, the property location, access, intended use, and the complete water system are needed for a useful drilling conversation.

Do statewide licensing rules also apply?

Yes. The Texas Department of Licensing and Regulation states that a license is required to drill a water-related well in Texas and to install a pump for a water-related well.

What if the property may already have a well?

Start with the free Texas well check to review public records near the address before planning new work.

Communities we serve

Water well drilling across Hamilton County

Request a drilling estimate for property in and around Hamilton, Hico, Evant, Jonesboro, Carlton, Pottsville, Fairy, Cranfills Gap, Shive, Indian Gap, Purmela, and rural parts of Hamilton County.

Free drilling estimate

Tell us about your Hamilton County property

Send the property location, intended use, and timing. TurnKey Wells will follow up to learn what you need, answer initial questions, and discuss the next step toward a water well drilling quote.

  • No long questionnaire
  • A real follow-up about the property
  • Clear options for drilling and pre-drill planning

Request a Water Well Drilling Quote

Tell us where the property is, what the well needs to support, and when you hope to begin.

Name
Property / well location
Use the exact 911 address when available. For rural land, enter decimal coordinates or the parcel and legal description.
Confirm property location

Your information is used to respond to this request. Privacy Policy