Home / Texas water well drilling / Comanche County

Comanche County, Texas

Water well drilling in Comanche County

Acreage outside Comanche can present a different drilling plan from property near De Leon, Gustine, or Sidney. Share the location and what the water needs to support, and TurnKey Wells will help you move toward a useful drilling estimate.

  • Address-based project intake
  • Property-specific planning
  • Clear next steps
2,806Total submitted groundwater and drilling records
1,147Domestic well records
452Stock well records
1,036Irrigation well records

Have land in Comanche County? Start with the property address and your water needs.

Comanche County well depths

What nearby well records tell you

Domestic well records in Comanche County have a median reported depth of 140 feet. The middle half runs from 100 to 210 feet, while the 10th-to-90th percentile span reaches from 80 to 318 feet. Those figures describe 1,147 domestic records and provide a stronger planning baseline than a countywide average that mixes many well uses.

The exact plan still depends on the property. A site near Comanche may not match acreage north of De Leon or land closer to the Brown County line. Nearby records, aquifer assignment, access, power, household demand, livestock use, irrigation, storage, and treatment needs all belong in the conversation.

Plain answer: County records can set a realistic starting range. The property location is what turns that range into a useful estimate.

Recorded domestic well depths

The middle half of reported domestic depths

100 feet210 feet
What the county records contain

Comanche County records reflect homes, ranches, and irrigation

Domestic, irrigation, and stock wells make up most of the submitted county file. Monitoring wells, test wells, and environmental borings should still be separated so their shallow depths do not distort the numbers a rural property owner is likely to use.

1,147

Domestic wells

Household and private-property water records. All 1,147 include a reported depth. The median is 140 feet, the middle half runs from 100 to 210 feet, and the 10th-to-90th percentile span is 80 to 318 feet.

452

Stock wells

Records tied to livestock use. All 452 include a reported depth. The median is 140 feet, the middle half runs from 94 to 220 feet, and the 10th-to-90th percentile span is 70 to 317 feet.

1,036

Irrigation wells

Wells reported for crop, pasture, or landscape irrigation. Of these, 1,035 include a reported depth. The median is 110 feet, the middle half runs from 80 to 140 feet, and the 10th-to-90th percentile span is 65 to 180 feet.

137

Test, monitoring, and environmental records

This group includes 33 test wells, 80 monitoring wells, and 24 environmental soil borings. These records describe subsurface work in the county, but they should not be counted as ordinary household water wells.

34

Other reported uses

This group includes 27 records marked other, two rig-supply wells, two industrial wells, two closed-loop geothermal records, and one public-supply well.

Depth and record history

Different well uses produce different depth patterns

Domestic and stock records both center near 140 feet. Irrigation records center near 110 feet, while monitoring and environmental work is much shallower.

Record typeMedian depthMiddle halfMedian completion year
Domestic140 ft100-210 ft2014
Stock140 ft94-220 ft2017
Irrigation110 ft80-140 ft2015
Test wells120 ft80-160 ft2013
Monitoring wells30 ft23-39.3 ft2012
Environmental soil borings8 ft5-15 ft2005

The year shown is the median completion year within each record group. It describes the historical file, not the present condition or expected service life of a particular well.

Data source: Texas Water Development Board Submitted Driller's Reports.

What shapes a drilling estimate

The complete job is more than drilling by the foot

A useful estimate should account for where the rig can work, which water-bearing unit is being targeted, how much water the property needs, and the equipment required to deliver it.

01

Property access

County roads, gates, slopes, overhead lines, septic setbacks, and enough room for the drilling rig and support equipment.

02

Water demand

Household use, livestock, irrigation, storage, and peak demand. A home, cattle operation, and irrigation system require different planning.

03

Pump and power

Pump setting, electrical service, controls, pressure tank, trenching, and the distance from the well to the point of use.

04

Complete installation

Casing, testing, pump equipment, storage or treatment when needed, plumbing, startup, and site cleanup.

Start with the property

Get a drilling estimate built around what the land actually needs

Share the Comanche County property location, intended use, and timing. TurnKey Wells will follow up to understand the project and explain the next step.

Ranch water well system planning for Comanche County Texas acreage
Plan the whole water system

Know what should be included before work begins

A drilling quote is easier to compare when each major piece is listed. The well, pump, controls, pressure system, power, trenching, storage, treatment, testing, and cleanup should not be reduced to one unexplained total.

  • Mobilization and setup
  • Drilling and casing
  • Pump and controls
  • Pressure tank
  • Power and trenching
  • Storage and treatment
  • Water testing
  • Site cleanup

Request a Drilling Quote

Property-specific well research

Pre-Drill Intelligence Report

$199 one-time report

The county numbers on this page show broad patterns. The paid report narrows the research to one property before you compare drilling quotes or decide how to plan the water system.

  • Nearby recorded wells and reported depths
  • Property and groundwater district information
  • Questions to ask before drilling begins
  • A clearer picture of the complete water system

Historical Comanche County groundwater records are dominated by Trinity Aquifer assignments, especially Twin Mountains. Cross Timbers and mixed Trinity/Cross Timbers assignments also appear. The report organizes nearby records, aquifer context, and Middle Trinity Groundwater Conservation District information around the property so you can ask better questions before drilling begins.

Simple next steps

From property address to drilling conversation

Tell us about the property

Share the address, how the water will be used, and when you hope to begin.

We review the project

We look at the location and follow up for any details needed to discuss the estimate.

Plan the drilling work

You receive a clear next step for the drilling quote and complete water system.

Comanche County well questions

Plain answers before you plan the work

Which groundwater district serves Comanche County?

Comanche County is within the Middle Trinity Groundwater Conservation District. The district serves Bosque, Comanche, Coryell, and Erath counties and publishes separate well-registration and operating-permit forms.

When does the district call for an operating permit?

The district's current forms say an operating permit application is used when the well is expected to pump more than 17 gallons per minute or is on 10 acres or less, subject to stated exceptions and board approval. Confirm the current rule, tract history, spacing, registration, and permit requirements for the exact property before drilling.

Is every Comanche County well in the same aquifer?

No. Historical Groundwater Database records for the county include Trinity, Cross Timbers, mixed Trinity/Cross Timbers, other, and unassigned records. Trinity is the largest family in the file, but the aquifer assignment still needs to be checked near the property.

Are all 2,806 records producing water wells?

No. The total includes monitoring wells, environmental soil borings, test wells, and several specialized uses. This page separates those records so they are not mistaken for household wells.

Can county records predict the depth on one property?

No. County records show patterns, not a guaranteed depth or yield. Nearby records, aquifer conditions, the property location, access, intended use, and the complete water system are needed for a useful drilling conversation.

Do statewide licensing rules also apply?

Yes. The Texas Department of Licensing and Regulation states that a license is required to drill a water-related well in Texas and to install a pump for a water-related well.

What if the property may already have a well?

Start with the free Texas well check to review public records near the address before planning new work.

Communities we serve

Water well drilling across Comanche County

Request a drilling estimate for property in and around Comanche, De Leon, Gustine, Sidney, Proctor, Sipe Springs, Energy, Comyn, Hasse, Newburg, and rural parts of Comanche County.

Free drilling estimate

Tell us about your Comanche County property

Send the property location, intended use, and timing. TurnKey Wells will follow up to learn what you need, answer initial questions, and discuss the next step toward a water well drilling quote.

  • No long questionnaire
  • A real follow-up about the property
  • Clear options for drilling and pre-drill planning

Request a Water Well Drilling Quote

Tell us where the property is, what the well needs to support, and when you hope to begin.

Your Name
Location Method
Consent

Your information is used to respond to this request. Privacy Policy